TUTORIALS

Friday, May 6, 2016

Xiaomi Note 3 Unbrick, Bootloader Unlock, Firmware & Guides [Qualcomm]
| 1:30 AM | No Comments

Xiaomi Note 3 Unbrick, Bootloader Unlock, Firmware & Guides [Qualcomm]



Xiaomi Note 3 Unbrick, Bootloader Unlock, Firmware & Guides






Important: Try on windows 64 bit OS as windows 32 bit not working properly at the movement.
Note: This phone can not be flashed via fastboot as its locked bootloader so
you can only flash via EDL mode
Tools & Firmware's:
Flash Tool MiFlash_2016.03.30.exe
Stock Firmwares:
China Stable (V7.2.2.0) : Download Here

Global Stable (V7.1.8.0) : Download Here
Latest:
China Stable (V7.2.3.0) : Download Here

Global Stable (V7.2.3.0) : Download Here

Custom Recovery & Supersu.zip
Twrp Recovery
Other:
Edited fixed flash_all.bat and rawprogram0.xml

Procedure 1 : Flashing guide for Bricked Phone with Locked Boot-loader
Note: This guide vil show you how to Reboot Into EDL mode when you re on bootloop
on MI Logo or with 3 Dots.

Manual method to get EDL Mode:
* 1st you have to power off your phone,In some case if unable to power off then you have to wait until it discharge and power off
otherwise you have to open the mobile and remove battery to power off your phone.

* If you power off your phone by discharging then before start charge your battery again to least 25 to 40%.

* Disconnect yur phone form charger.

* Now Important Step, Connect usb cable and immediately press both Vol Keys or press both the vol keys nd connect the usb to Get EDL mode.
if any thing goes wrong it vil show mi logo or boot it to test mode.

if its successfully done your phone will be detected in device manager as

Code:
"Qualcomm HSUSB QLoader 9008"
If you see QHUSB_BULK in device manager update the qualcomm driver from mi-flash tool Installed path.
Note: In windows 64 bit Disable Driver Signature Enforcement before update Driver
otherwise it vil not install.
If fully hard bricked, you have to disassemble your phone and use test point to get EDL mode.

* Disconnect all the cables and flat cables

* Reconnect only Battery Display and USB

* Connect the phone to PC, open Mi Flash and load the ROM.

* Then short the points now your device should detect as EDL mode "Qualcomm HSUSB QLoader 9008"
Flashing Method By Mi Flash Tool:
* Extract the firmware.

* Run mi flash tool and show the path where you extracted the firmware folder.

* Goto Advance tab and select files lik gvn in the below image.

* Now Press Refresh and You should see you phone com ported detected.

* At last Press Flash nd it should Flash your Phone.
Note : After its Done Manually Reboot.

If you face same error like below given

Code:
"The system can not find the file specified (0x80070002: Max buffer sector is 256)"
Replace with edited fixed flash_all.bat and rawprogram0.xml and try again
____________________________________________
Procedure 2: Soft bricked & adb driver detected Phones.
* Run this Command to get EDL mode

Code:
adb reboot edl
* if its successfully done your phone will be detected in device manager as below given

Code:
"Qualcomm HSUSB QLoader 9008"
If you see QHUSB_BULK in device manager update the qualcomm driver from mi-flash tool Installed path.
Note: In windows 64 bit Disable Driver Signature Enforcement before update Driver
otherwise it vil not install.
* Run MI Flash Tool Show the extracted firmware folder path.

* Press Refresh you should see your device port detected.

* Press flash after complete reboot your device.
________________________________________________


Bootloader unlocking and root updating........

Wednesday, May 4, 2016
| 1:41 AM | No Comments

HOW TO REMOVE XIAOMI MI ACCOUNT

Xiaomi Mi Account Removing - Guide

How to remove mi account from xiaomi device.

Process of removing account pretty simple as chewing bubble gum

What you need just small tool called fastboot,get it from attachment below.

Now open command and change path to fastboot folder.

and use this command to remove account.


Code:

fastboot -w

Just reboot your device now,account should be no more.

It could possible in some device account back on as activate data,so you need full flash your phone to remove it completely.

SolutionBy
Khusi Telecom
Attached Files Attached Files

How to bypass remove pattern lock Finger print S6 S6 EDGE without data lose.
| 1:27 AM | 1 Comment

How to bypass remove pattern lock Finger print S6 S6 EDGE without data lose.

How to bypass remove pattern lock finger print S6 S6 EDGE without data lose.

First of all i'm not responsible if your device bricked using this method.

Note : first check your phone bootloader by VOL Down + Home + Power.


  1. check your phone if FRP locked as show in image above.
  2. If you see on then you need any of prof box to make it off.
  3. Download recovery for your model from https://twrp.me/Devices/
  4. Download odin to flash recovery you downloaded above : http://odindownloadxda.com/Odin3_v3.10.7.zip .
  5. Now connect phone in download mode (vol down + home + power).
  6. open odin and select downloaded recovery in PDA or AP.
  7. Uncheck auto reboot.
  8. Click on start,remove phone when you see PASS in odin.
  9. Now press and hold (vol up + power) to reboot from bootloader.
  10. As phone reboot press and hold (vol up + home + power ) you have to do it quickly to avoid overwrite official recovery.
  11. You now are in TWRP mode,something like pic below.
  13. Now select Mount and mount system and data,be careful there is also option for format system which can brick your device.
  14. Now back to main menu of TWRP and select advance and then file manager.
  15. Now goto data > system .
  16. Now delete every file with extension of .key.
  17. Reboot your phone now you have pattern password finger print removed without lose anything
  18. This method also apply for other samsung phones such as Note5.

Tuesday, May 3, 2016
| 6:37 AM | No Comments

Micromax E481 Frp Lock Removed

Samsung J7 Boot Repair Tutorials via Emmc
| 1:12 AM | No Comments

Samsung J7 Boot Repair Tutorials via Emmc